<< Click to Display Table of Contents > 

SAMLight Manual > Entities (Objects) > Bitmap > Improved Bitmap Mode > B&W Normal > Example B&W

Example B&W 		Previous pageReturn to chapter overviewNext page

This chapter guides you from a first B&W Normal bitmap marking (USC-2/-3 only) to an optimized result. The example values are based on a system with a 10 W fiber laser and 120 mm field size.

•Bitmap Presets
Pen and bitmap settings required for the first black & white bitmap marking.

•Optimize Contrast
Mark Speed and Dither Step adjustments to optimize the marked gray levels.

•Optimize Line Shift
Line Shift adjustments to optimize bidirectional marking.

•Optimize Bitmap Marking Time
Acceleration Ramp and Jump Delay adjustments to optimize process time.