<< Click to Display Table of Contents >  SAMLight Manual > Option Flash (USC-2/3 only) > Job processing > Flash Job IO Selection Flash Job IO Selection

By clicking on the button "JobIOSelect", the Flash Job IO Select mode can be activated in Flash mode. Then jobs can be loaded and marked via the OptoIn bits of the USC-2 or USC-3 card. See chapter Flash IO Job Selection.

Once the Job IO Selection mode is entered in the Flash mode, the marking can be started only with an external trigger. To exit the Job IO Selection mode you have to press the "STOP IOSelect" button in the flash menu.

Figure 388: JobIO Selection in Flash Mode