|
<< Click to Display Table of Contents > Introduction |
  
|
|
<< Click to Display Table of Contents > Introduction |
|
Welcome to our new Flash Control Interface (FCI) documentation.
This manual will teach and show you how to interact with your USC-Card in Standalone Mode. The following chapters specify the FCI Communication as well as the FCI Command Reference with all commands explained.
Further information about the Option Flash itself can be found in the SAMLight manual as well as in the several hardware manuals of the USC-2 and USC-3.
Figure 1: USC-2 USB Scanner Controller V1.5 |
Figure 2: USC-3 USB Scanner Controller V1.3 |
