DLL Function

int CCI_Return = ScSetDoubleValue(int Value_Type, double Parameter)

double Parameter = ScGetDoubleValue(int Value_Type)

ASCII Function

int CCI_Return = ScCciSetDoubleValue(int Value_Type, double Parameter)

double Parameter = ScCciGetDoubleValue(int Value_Type)

Description

Set or get different primary head parameters.

Value_Type

Type: int

ID:

Location: ScComSAMLightClientCtrlValueTypes

scComSAMLightClientCtrlDoubleValueTypePrimaryHeadOffsetX

65546

The offset X correction factor of the primary head can be set or get. [mm]*

scComSAMLightClientCtrlDoubleValueTypePrimaryHeadOffsetY

65547

The offset Y correction factor of the primary head can be set or get. [mm]*

scComSAMLightClientCtrlDoubleValueTypePrimaryHeadGainX

65548

The gain X correction factor of the primary head can be edited. [mm]*

scComSAMLightClientCtrlDoubleValueTypePrimaryHeadGainY

65549

The gain Y correction factor of the primary head can be edited. [mm]*

scComSAMLightClientCtrlDoubleValueTypePrimaryHeadRotate

65550

Using this constant the rotational angle of the primary head can be set or get. [deg]

scComSAMLightClientCtrlDoubleValueTypePrimaryHeadEnable

65551

Using this constant the primary head can be activated or deactivated.

Parameter

Type: int

Unit: depends on constant

Set or get the required parameter.

CCI_Return

Type: int

CCI return number, see error list.

Notes

•The default unit is mm, but the user can select a different unit.

•If the command is sent during marking, it will be applied to the next one - not the current.

C# Example: Set gain X for primary head:
 
int CCI_Return = cci.ScSetDoubleValue((int)ScComSAMLightClientCtrlValueTypes.scComSAMLightClientCtrlDoubleValueTypePrimaryHeadGainX, 0.8);

C# Example: Head offset X for primary head:
 
double Parameter = cci.ScGetDoubleValue((int)ScComSAMLightClientCtrlValueTypes.scComSAMLightClientCtrlDoubleValueTypePrimaryHeadOffsetX);

DLL Function

int CCI_Return = ScSetEntityDoubleData(string Entity_Name, int Data_ID, double Parameter)

int CCI_Return = ScGetEntityDoubleData(string Entity_Name, int Data_ID, ref double Parameter)

ASCII Function

int CCI_Return = ScCciSetEntityDoubleData(string Entity_Name, int Data_ID, double Parameter)

double Parameter = ScCciGetEntityDoubleData(string Entity_Name, int Data_ID)

Description

Set or get different secondary head entity parameters.

Value_Type

Type: int

ID:

Location: ScComSAMLightClientCtrlFlags

scComSAMLightClientCtrlDoubleDataIdSecondaryHeadTransformationOffsetX

88

The offset X correction factor for secondary head entities can be set or get. [mm]*

scComSAMLightClientCtrlDoubleDataIdSecondaryHeadTransformationOffsetY

89

The offset Y correction factor for secondary head entities can be set or get. [mm]*

scComSAMLightClientCtrlDoubleDataIdSecondaryHeadTransformationScaleX

90

The scale X correction factor for secondary head entities can be edited. [mm]*

scComSAMLightClientCtrlDoubleDataIdSecondaryHeadTransformationScaleY

91

The scale Y correction factor for secondary head entities can be edited. [mm]*

scComSAMLightClientCtrlDoubleDataIdSecondaryHeadTransformationRotation

92

The rotational angle of the secondary head can be set or get. [deg]

Parameter

Type: int

Unit: depends on constant

Set or get the required parameter.

CCI_Return

Type: int

CCI return number, see error list.

Notes

•These secondary head  transformation commands are only available for USC-2/3

with license for Head2 and activated Head2.

•The default unit is mm, but the user can select a different unit.

C# Example: Set offset X for secondary head:
 
int CCI_Return = cci.ScSetEntityDoubleData("Entity_1", (int)ScComSAMLightClientCtrlFlags.scComSAMLightClientCtrlDoubleDataIdSecondaryHeadTransformationOffsetX, 2.55);

C# Example: Get head offset X for secondary head:
 
double Offset_X = 0.0;

int CCI_Return = cci.ScGetEntityDoubleData("Entity_1", (int)ScComSAMLightClientCtrlFlags.scComSAMLightClientCtrlDoubleDataIdSecondaryHeadTransformationOffsetX, ref Offset_X);

DLL Function

int CCI_Return = ScSetDoubleValue(int Value_Type, double Parameter)

double Parameter = ScGetDoubleValue(int Value_Type)

ASCII Function

int CCI_Return = ScCciSetDoubleValue(int Value_Type, double Parameter)

double Parameter = ScCciGetDoubleValue(int Value_Type)

Description

Set or get different secondary head parameters.

Value_Type

Type: int

ID:

Location: ScComSAMLightClientCtrlValueTypes

scComSAMLightClientCtrlDoubleValueTypeSecondaryHeadOffsetX

65552

The offset X correction factor of the secondary head can be set or get. [mm]*

scComSAMLightClientCtrlDoubleValueTypeSecondaryHeadOffsetY

65553

The offset Y correction factor of the secondary head can be set or get. [mm]*

scComSAMLightClientCtrlDoubleValueTypeSecondaryHeadGainX

65556

The gain X correction factor of the secondary head can be edited. [mm]*

scComSAMLightClientCtrlDoubleValueTypeSecondaryHeadGainY

65557

The gain Y correction factor of the secondary head can be edited. [mm]*

scComSAMLightClientCtrlDoubleValueTypeSecondaryHeadRotate

65558

The rotational angle of the secondary head can be set or get. [deg]

scComSAMLightClientCtrlDoubleValueTypeSecondaryHeadEnable

65559

Using this constant the secondary head can be activated or deactivated.

Parameter

Type: int

Unit: depends on constant

Set or get the required parameter.

CCI_Return

Type: int

CCI return number, see error list.

Notes

•These secondary head transformation commands are only available for USC-2/3

with license for Head2 and activated Head2.

•The default unit is mm, but the user can select a different unit.

C# Example: Set gain X for secondary head:
 
int CCI_Return = cci.ScSetDoubleValue((int)ScComSAMLightClientCtrlValueTypes.scComSAMLightClientCtrlDoubleValueTypeSecondaryHeadGainX, 0.8);

C# Example: Head offset X for secondary head:
 
double Parameter = cci.ScGetDoubleValue((int)ScComSAMLightClientCtrlValueTypes.scComSAMLightClientCtrlDoubleValueTypeSecondaryHeadOffsetX);