Global Settings > Extras

<< Click to Display Table of Contents >

Client Control Interface Manual > Global Settings > Extras

Extras

Previous page

Return to chapter overview

Next page

The following parameters for Improved Beam Compensation can be found and only be set in SAMLight at Settings → System → Extras.

•Grayscale PixelMap Mode

•Improved Beam Compensation

Grayscale PixelMap Mode			☒ Set ☒ Get
DLL Function	int CCI_Return = ScSetLongValue(int Value_Type, int PixelMap_Mode) int PixelMap_Mode = ScGetLongValue(int Value_Type)
ASCII Function	-
Description	Set or get the status of the SAMLight Improved Beam Compensation.
Value_Type	Type: int		ID:
	Location: ScComSAMLightClientCtrlValueTypes
	scComSAMLightClientCtrlLongValueTypePixelMapType		150
PixelMap_Mode	Type: int	Unit: none
PixelMap_Mode	•0: Dynamic Grayscale Map disabled •1: Dynamic Grayscale Map enabled, linear interpolation •2: Dynamic Grayscale Map enabled, cubic interpolation •3: Dynamic Grayscale Map enabled, hermite interpolation
CCI_Return	Type: int
CCI_Return	CCI return number, see error list.
Notes	-
C# Example: Enable Dynamic Grayscale Map and set interpolation to linear: int CCI_Return = cci.ScSetLongValue( ( int )ScComSAMLightClientCtrlValueTypes.scComSAMLightClientCtrlLongValueTypePixelMapType, 1 );
C# Example: Check Grayscale PixelMap Mode int PixelMap_Mode = cci.ScGetLongValue( ( int )ScComSAMLightClientCtrlValueTypes.scComSAMLightClientCtrlLongValueTypePixelMapType );

Table 67: Grayscale PixelMap Mode

Improved Beam Compensation			☒ Set ☒ Get
DLL Function	int CCI_Return = ScSetLongValue(int Value_Type, int Improved_Beam_Compensation) int Improved_Beam_Compensation = ScGetLongValue(int Value_Type)
ASCII Function	-
Description	Set or get the status of the SAMLight Improved Beam Compensation.
Value_Type	Type: int		ID:
	Location: ScComSAMLightClientCtrlValueTypes
	scComSAMLightClientCtrlLongValueTypeEnableImprovedBeamCompensation		137
Improved_Beam_ Compensation	Type: int	Unit: none
Improved_Beam_ Compensation	•0: Disable Improved Beam Compensation •1: Enable Improved Beam Compensation
CCI_Return	Type: int
CCI_Return	CCI return number, see error list.
Notes	-
C# Example: Enable Improved Beam Compensation: int CCI_Return = cci.ScSetLongValue( ( int )ScComSAMLightClientCtrlValueTypes.scComSAMLightClientCtrlLongValueTypeEnableImprovedBeamCompensation, 0 );
C# Example: Check if Improved Beam Compensation is enabled: int Mode = cci.ScGetLongValue( ( int )ScComSAMLightClientCtrlValueTypes.scComSAMLightClientCtrlLongValueTypeEnableImprovedBeamCompensation );

Table 68: Improved Beam Compensation