<< Click to Display Table of Contents > 

USC-2 Manual > Board And Connectors > Head2 - 26 pin

Head2 - 26 pin 		Previous pageReturn to chapter overviewNext page

The connector HEAD2 provides the standard XY2-100 interface. The pin assignment is shown in figure below.

Type

Name

Pin number

 

head2

Figure 8: HEAD2 Connector Assignment

Output

CLK_1+

pin 2

CLK_1-

pin 1

Sync_1+

pin 4

Sync_1-

pin 3

X_1+

pin 6

X_1-

pin 5

Y_1+

pin 8

Y_1-

pin 7

Z_1+

pin 10

Z_1-

pin 9

Input

Stat_1+

pin 12

Stat_1-

pin 11

Ground

GND

pin 20, 21, 22

N.C.

N.C.

pin 13, 14, 15, 16, 17, 18, 19, 23, 24, 25, 26

Table 15: Head2 - 26 Pin Assignment

warning

N.C.: Do not connect!

Make sure that the scan head and the USC have the same ground potential, to avoid damages caused by ESD.