<< Click to Display Table of Contents >  First Steps with SAMLight & USC > Introduction Introduction

Welcome and Thank You

 

Thank you for choosing your first system from us.

We appreciate your trust and are sure that the quality and reliability of our products will fully convince you.

 

We wish you great success using our system.

 

This documentation is designed to guide you through the initial setup process.

Step by step, it will explain everything you need to know to get your system up and running — all the way to your very first marking.

 

Note that this manual will not go too deep into detail regarding all different functionalities of our hardware and software.

It will briefly explain how to wire your components (laser and scan head) and which software configuration is required.