<< Click to Display Table of Contents > 

SAMLight Manual > sc_usc_server.exe > sc_usc_server_log

sc_usc_server_log 		Previous pageReturn to chapter overviewNext page

While running, the USC server is writing a protocol on connection status, firmware update availability and IP and MAC address, as well as several license-depending features, such as status of Flash Mode, Job IO Selection mode, TELNET Mode, FTP server, HTML server and Stepper Mode.

sc_usc_server_log

Table 5:USC server

After closing the server, the protocol is saved in the sc_usc_server_log.txt file. This file can be helpful for troubleshooting.

note

For USC-3 cards, FTP is always enabled, although it is possible that this is not displayed in the server log.