|
<< Click to Display Table of Contents > sc_usc.cfg |
  
|
|
<< Click to Display Table of Contents > sc_usc.cfg |
|
The ASCII file <SCAPS>\system\sc_usc.cfg consists of the following entries.
|
Go to the Windows task manager and make sure the process sc_usc_server.exe is not running before you edit the file. Changes only take effect after re-powering the USC card. |
|---|
Entry |
Value |
Description |
|---|---|---|
InvertOptoOut |
0 | 1 |
invert the Opto_Outs (only for USC-1) |
VisibleMode |
0 | 1 |
start sc_usc_server.exe in visible mode |
ServerRestart |
0 | 1 |
deprecated, will be deleted using the latest sc_usc_server.exe |
ForceUSB11 |
0 | 1 |
If set to 1 the sc_usc_server.exe is establishing a USB 1.1 connection to the USC card. Not available for USC-3. |
Connect0 |
IP-Address |
IP-Address of the USC-2/3 |
Connect1 |
IP-Address |
- |
Connect2 |
IP-Address |
- |
Connect3 |
IP-Address |
- |
Connect4 |
IP-Address |
- |
Connect5 |
IP-Address |
- |
Connect6 |
IP-Address |
- |
Connect7 |
IP-Address |
- |
Connect8 |
IP-Address |
- |
Connect9 |
IP-Address |
- |
Connect10 |
IP-Address |
- |
Connect11 |
IP-Address |
- |
Connect12 |
IP-Address |
- |
Connect13 |
IP-Address |
- |
Connect14 |
IP-Address |
- |
Connect15 |
IP-Address |
- |
MultiCard |
0 | 1 |
set the value to one when using more than one USC-2/3 |
DontOverrideCfgAndId |
0 | 1 |
The files sc_usc.cfg and sc_usc_card_ids.txt are being write protected if it is set to 1 |
FlashTrailDir |
|
Default: "%SCAPS_SAM%\intermed" Defines the location where the trail file sc_flash_trail.zip will be saved. |
FlashLoadSaveTrail |
0 | 1 | 2 |
0: disable 2: enables trailing for UNF uploads without deleting temp files |
MaxNumTrailEntries |
default: 128 |
defines maximal number of subfolders in sc_flash_trail.zip file in FlashTrailDir |
Table 3: sc_usc.cfg
