<< Click to Display Table of Contents >  SAMLight Manual > Option MOTF > 1D MOTF Splitting 1D MOTF Splitting

The "Marking On The Fly" (MOTF) itself can be seen as a way of enlarging the working area of a scan head. However, the entities to be marked still need to be placed all within the valid field in SAMLight which restricts the widening of the field significantly.

If entities bigger than the working area should be marked on the moving target, 1D MOTF splitting needs to be used. This feature splits the whole job into smaller parts ready to be marked by the scan head within the working area.