<< Click to Display Table of Contents > 

AEB-2 Manual > Output Range

Output Range 		Previous pageReturn to chapter overviewNext page

The AEB-2 provides a differential output signal as shown in figure 14.

output range

Figure 14: AEB-2 analog output

The output range may be selected for each channel separately with solder jumpers on the top side of the AEB-2 as shown in figure 15 and described in table 4.

aeb2_top_sj

Figure 15: Output range selection

Output

Jumper

State

Output range

X

SJ1

Open

-10 V..+10 V

Closed

-5 V..+5 V

Y

SJ3

Open

-10 V..+10 V

Closed

-5 V..+5 V

Z

SJ5

Open

-10 V..+10 V

Closed

-5 V..+5 V

Table 4: AEB-2 output range selection

note

By default, the 3 jumpers SJ1, SJ3 and SJ5 are closed, i.e. the output range is set to -5 V..+5 V.