|
<< Click to Display Table of Contents > XY2-100 |
  
|
|
<< Click to Display Table of Contents > XY2-100 |
|
|
The laser has to be safe while testing the XY2-100 signals! |
|---|
This test initiates the scanner to describe a circle. If the check box "Square" is enabled, the scanner will describe a square. Both geometric figures are computed in 2000 steps with a resolution of 16 bits. So the output is in full scale deflection. Use this test for example in connection with the AEB and an oscilloscope whereas the laser is not active.
