<< Click to Display Table of Contents >  USC-3 Manual > Introduction > Features and Capabilities Features and Capabilities

The USC-3 has the following key features:

System:

•Quad-processor, main control, real time output, standalone 3D and communication unit

•USB 2.0 controller

•10/100/1000 Mb/s Ethernet controller

•256 MB DDR3 RAM

•10 us cycle time

Laser control:

•Laser Gate Output:

oLaser On and Off delay with 500 ns resolution

oOpto coupler TTL Level

•Q-Switch output:

oFrequency resolution: 20 ns (50 MHz clock)

oPulse length resolution: 20 ns

oOpto coupler TTL level

•First pulse killer output:

oResolution 20 ns

oOpto coupler TTL level

•2 x 12 bit analog channels with  2.5, 5, 10 V output range

•1 x 8 bit TTL level output port

Scanner control:

•2 x XY2-100 3-axis digital interface

External control:

•6 opto-isolated outputs

•6 opto-isolated inputs (5 V - 24 V level)

•10 bit digital TTL level outputs

•10 bit digital TTL level inputs

•1 x RS-232 interface

•2 x Marking On The Fly (MOTF) channels

•3-axis stepper motor controller

•2 x 10 bit analog input channels

Stand-alone operation:

•8 GB microSDHC card

•Up to 255 jobs on flash memory

•On board configuration setup

•Battery buffered real time clock

 

Special features:

•regulation of laser power during marking via analog inputs signal (for further details, please contact info@scaps.com)