<< Click to Display Table of Contents >  USC-2 Manual > Introduction > Overview Overview

The USC-2 interface module is designed for controlling a 2-axis galvanometric scanner system. It supplies also all necessary signals for laser and external control. As an option, the control of a 3-axis system is also possible.

The controller commands are downloaded via the USB (Version 1.1 or 2.0) or Ethernet interface from the connected host system. The received commands are stored in a data buffer. When a block of valid data is available the system enables it for execution while filling additional buffer blocks with new data transmitted from the host system.  The USC-2 can execute several commands within a 10 us (default) output interval.