<< Click to Display Table of Contents > Features |
The USC-2 has the following key features:
System:
•Dual-processor, main control and real time output unit
•USB 1.1 - 2.0 controller
•10/100 Mb/s Ethernet controller
•64 MB DDR RAM
•10 us cycle time
Laser control:
•Laser Gate Output:
oLaser On and Off delay with 500 ns resolution
oOptocoupler TTL Level
•Q-Switch output:
oFrequency resolution: 20 ns (50 MHz clock)
oPulse length resolution: 20 ns
oOptocoupler TLL level
•First pulse killer output:
oResolution 20 ns
oOptocoupler TTL level
•2 x 12 bit analog channels with 2.5, 5, 10 V output range
•1 x 8 bit TTL level output port
Scanner control:
•2 x XY2-100 3-axis digital interface
External control:
•6 opto-insulated outputs
•6 opto-insulated inputs (5 - 24 V level)
•10 bit digital TTL level outputs
•10 bit digital TTL level inputs
•RS-232 interface
•2 x MarkingOnTheFly channels
•3-axis stepper motor controller
•2 x 10 bit analog input channels
Stand-alone operation:
•1 GB flash memory
•Up to 255 jobs on flash memory
•On board configuration setup
•Battery buffered real time clock