<< Click to Display Table of Contents > USB |
Standard USB Series B Connector. The maximal cable length recommended with standard cables is 5 meters.
USB version: USB 2.0
The following figure 11 shows the connection between USB shield and USC-3 GND.
Figure 12: USC-3 SJ7 diagram
SJ7 is closed by default and can be opened to disconnect the USB shield and USC-3 GND. The location of the solder jumper SJ7 is shown here USC-3 bottom view.
Transfer rates |
approximately |
---|---|
Ethernet |
4 MByte/s |
USB 2.0 |
6 MByte/s |
Table 21: Transfer rates