<< Click to Display Table of Contents >  USC-3 Manual > Introduction > Overview Overview

The USC-3 interface module is designed for controlling a 2-axis galvanometric scanner system. It supplies also all necessary signals for laser and external control. As an option, the control of a 3-axis system is also possible.

The controller commands are downloaded via the USB 2.0 or Ethernet interface from the connected host system. The received commands are stored in a data buffer. When a block of valid data is available the system enables it for execution while filling additional buffer blocks with new data transmitted from the host system. The USC-3 can execute several commands within a 10 us (default) output interval.