<< Click to Display Table of Contents > 

USC-3 Manual > Board And Connectors > LED - 4 pin

LED - 4 pin
Previous pageReturn to chapter overviewNext page

The LED signals can be gripped at the multi-pin connector X6. The pin assignment is shown below.

If external LEDs should be connected, please use a suitable signal amplifier (e.g. buffer 74HC244).

Type

Name

Pin number

 

LED_-_4_pin

Figure 10: LED - 4 pin assignment

Output

LED_OP

pin 1

LED MIP

pin 2

LED_FA

pin 3

Ground

GND

pin 4

Table 20: LED - 4 pin assignment