<< Click to Display Table of Contents > Features and Capabilities |
The USC-3 has the following key features:
System:
•Quad-processor, main control, real time output, standalone 3D and communication unit
•USB 2.0 controller
•10/100/1000 Mb/s Ethernet controller
•256 MB DDR3 RAM
•10 us cycle time
Laser control:
•Laser Gate Output:
oLaser On and Off delay with 500 ns resolution
oOpto coupler TTL Level
•Q-Switch output:
oFrequency resolution: 20 ns (50 MHz clock)
oPulse length resolution: 20 ns
oOpto coupler TTL level
•First pulse killer output:
oResolution 20 ns
oOpto coupler TTL level
•2 x 12 bit analog channels with 2.5, 5, 10 V output range
•1 x 8 bit TTL level output port
Scanner control:
•2 x XY2-100 3-axis digital interface
External control:
•6 opto-isolated outputs
•6 opto-isolated inputs (5 V - 24 V level)
•10 bit digital TTL level outputs
•10 bit digital TTL level inputs
•1 x RS-232 interface
•2 x Marking On The Fly (MOTF) channels
•3-axis stepper motor controller
•2 x 10 bit analog input channels
Stand-alone operation:
•8 GB microSDHC card
•Up to 255 jobs on flash memory
•On board configuration setup
•Battery buffered real time clock
Special features:
•regulation of laser power during marking via analog inputs signal (for further details, please contact info@scaps.com)