<< Click to Display Table of Contents > Convert G-Code to *.unf Files |
1)Start the setup program (<SCAPS>\tools\sc_setup.exe). Select "Hardware Settings" and select 'sc_light_settings.sam' (default SAMLight settings file) and click 'Load' and 'Settings'.
a)General Settings: Here the SCAPS laser type '0' and version '0' have to be entered and the scanner settings have to be set up.
b)Driver Settings: Here all laser settings and the correction file have to be set up.
c)Press the "Store" button in "Driver Settings" to save the configuration on the USC-3 card. This is important for the standalone mode (flash mode).
2)Start the server in visible mode (<SCAPS>\system\sc_usc_server /v).
a)Set up LAN connection (Ethernet, RJ45)
3)Re-power USC-3 card
4)Use a FTP client program to get access to the USC-3 FTP server (ftp://USC-3-IP) and copy following files to it:
a)ftp://USC-3-IP/misc/sc_gcode_defines.cnc
Optional global G-Code define file containing definition commands.
b)ftp://USC-3-IP/jobs/*.cnc
G-Code job file containing program and function code. Defines which are already set in the G-Code define file will be overwritten by the values of the G-Code job file.
5)With the following flash commands you can convert the *.cnc files from the /jobs directory of the USC-3 card to *.unf files on the USC-3 flash memory (you can do so for example by going to <SCAPS>\system\sc_usc_server /v -> Flash -> PC-Mode: Convert "USC-3-IP/jobs/*.cnc" to *.unf on the flash memory with the flash interface command GCF.
6)After the *.unf file was generated it can be add to the job list pool by the FCI command JLA.