<< Click to Display Table of Contents > Software Settings |
The marking on the fly settings can be edited within the USC-1 global settings dialog.
Figure 34: Software settings
Enable: Generally enables the marking on the fly mode.
Simulation: Takes the internal 100 kHz clock generator as clock source.
Multiplier: Defines the multiply constant for converting Count pulses to field units. In the above example 1 count equals 1 µm. For a 100 mm field and the internal 100 kHz clock the marking of the fly speed is 100 mm / sec. The multiplier may also have negative sign. This can be used to invert the compensation direction.
X/Y Channel: Compensate along the Scanner X or Y axis.