<< Click to Display Table of Contents > System Requirements |
SAMLight will run under the following Microsoft Windows operating systems and is available as 32- and 64bit installer:
•Windows 11 (complete support starts with SAM version 3_9_5_0044_20200706 or 4_0_0_0006_20211019)
•Windows 10 - 32/64 (complete support including Secure Boot starts with SAM version 3_6_5_20161230_004 or 3_6_0_20170116_0001)
•Windows 8 - 32/64
•Windows 7 - 32/64
•Windows Embedded Standard 7 - 32
•Windows Vista - 32/64
•Windows XP - 32/64 (only up to SAM version 3_6_5_0124_20170907 or 3_6_0_0012_20170714, newer SAM versions are not supported)
•Windows XP Embedded - 32 (only up to version 3_6_5_0124_20170907 or 3_6_0_0012_20170714, newer SAM versions are not supported)
•Windows2000 (only up to version 3_6_5_0124_20170907 or 3_6_0_0012_20170714, newer SAM versions are not supported)
In order to run SAMLight correctly it is necessary that all current Windows Updates have been installed. For example: •On Windows 7 x64, KB3033929 must be installed for it to recognize the Jungo driver signature. •On Windows Vista, 7 and 8, KB3118401 must be installed, because of a bug in the universal C runtime. These updates can be installed via automatic Windows updates or manually from the provided links. |
---|
In order to avoid unwanted laser emissions or malfunctions during the operation procedure it is necessary to deactivate the Windows hibernation or any power saving mode. |
---|
The hardware requirements are not strictly defined. Depending on the application and to get a reasonable working speed you need much better components. Minimum requirements for SAM (Light) are very low:
•500 MHz x86-CPU
•256 MB RAM
•512 MB HDD
For big job files the following is recommended:
•8 GB RAM or more
•CPU with high clock rate (SAMLight mainly runs on a single core)
•64bit SAMLight (32bit allows to use up to 4 GB RAM)
•SSD or fast HDD
Increased hardware requirements could be necessary for the following applications:
•Many Bitmaps → more RAM required
•Large Jobs with many vector data → more RAM required
•Using mode Job IO Select → more RAM required, because of buffering of jobs
•Using complex jobs or using often calculations on the vector data → more RAM required
•Using option SAM3D → more RAM required (for slices) → because of more calculation operations for slicing; also more hard disc memory is recommended to buffer the slice data which have to be stored during the use of SAMLight; faster graphic is required for View3D
•Using option Optic3D → no additional requirements needed
•Using option MultiHead controlling many heads (up to six) → more RAM and processor power is recommended
•Using Background Camera → more GPU and processor power is required