|
<< Click to Display Table of Contents > Motion Control Settings |
  
|
|
<< Click to Display Table of Contents > Motion Control Settings |
|
The type of motion controller needs to be defined in the text file sc_motion_settings.txt. This file can be found in the folder <SCAPS>\system\. Type=#: Type of the motion controller stands for a number that specifies the controller (see table below): |
|---|
Type=# |
Name of motion controller |
Corresponding settings file in <SCAPS>\system\ |
|---|---|---|
0 |
Disable motion control |
none |
1 |
ims_settings.txt |
|
2 |
Standard (not supported) |
not supported any more |
3 |
Microcon Drive (not supported) |
not supported any more |
4 |
defined in customized *.dll |
|
5 |
sc_motion_mdrive_settings.txt |
|
6 |
sc_motion_faulmc_settings.txt |
|
7 |
sc_motion_iselit_settings.txt |
|
8 |
sc_motion_stepper_settings.txt |
|
9 |
sc_motion_generic232_settings.txt |
|
10 |
sc_motion_shstar2000_settings.txt |
|
11 |
sc_motion_jenaecostep100_settings.txt |
|
12 |
sc_motion_ioswitcher_settings.txt |
|
13 |
sc_motion_isel_settings.txt |
|
14 |
sc_motion_stepper_settings.txt |
Table 7: Available motion types