<< Click to Display Table of Contents > Jog Dialog |
You can use short keys for the motion control. You can set the short keys via 'Settings ⭢ System ⭢ Short Keys'. The short keys are assigned to the jog of the axes. |
---|
Figure 44: Jog dialog
Jog: Clicking on this button opens a dialog where the motor can be moved in both directions by "Jog Stepwidth" (++) or by "Jog Stepwidth / 10" (+).
The default jog step width value can be set in Settings→System→Extras. If the dialog is closed and opened again, this value is restored to the value that has been set in the menu. For each axis an independent speed can be used.