<< Click to Display Table of Contents > 

SAMLight Manual > Global Settings > General > Time Shift Map > Shift Map

Shift Map
Previous pageReturn to chapter overviewNext page

The following dialog allows to define a string mapping for working shifts. The according placeholder of Date Time is automatically replaced with these string definitions regarding the time of day. For how to define this placeholder, see the format definitions of Date Time object. The dialog can be reached by Menu bar → Settings → System → General → Shift Map.

shift_map

Figure 58: Shift Map Dialog

 

Shift: Shows the working shift which is currently selected.

Delete: Deletes the currently selected working shift.

Shift Start: Defines a start time for the selected working shift. The shift ends with the definition of a following shift.

Time format: hour:minute:second, Range: hour 0-23, minute 0-59, second 0-59.

Def.: Defines a string for the shift placeholder of date time to the given shift time.

Set: Creates a new shift if it is not defined yet, otherwise overwrites the selected working shift. The newly defined working shift gets numbered and sorted according to its start time.

note

In Flash jobs (USC-2/3) only the first shift map is available and will be used instead of the applied map number. The map has to be stored to the USC-2 card by clicking the STORE button in Optic settings→advanced.

note

The latest time shift ends at 24:00:00. Per default a new shift is added at 00:00:00 so that the shift string is used until the first user defined shift (1.Shift will be incremented to 2.Shift).