<< Click to Display Table of Contents > Barcode Format |
It is possible to differentiate between text encoded by the barcode and text shown below the barcode. Therefore a control code is given. To enable following control code, enter %H into the format field of the barcode property page.
The following types of barcodes are supported for this feature:
1D: 2 of 5, 3 of 9, Codabar, Code 128 Subtype A, Code 128 Subtype B, Code-128, Code-128, Code-39, Code-93, Ex Code 39, EAN-128, EAN-13, EAN-13+2, EAN-13+5, EAN-14, EAN-8, EAN-8+2, EAN-8+5, Ex Code39, GS1-128, GS1-128 CC-A/B, GS1-128 CC-C, I-2/5, UPC-A, UPC-E
2D: DataMatrixEx, Dotcode, QR Code EX
Control Code |
Meaning |
---|---|
%b |
Start to be only in barcode |
%c |
Display the checksum |
%h |
Start to be in human readable text only |
%e |
End of control code |
%% |
Insert a % sign |
Figure 208: Available barcode control codes
Figure 209: Example of a control code |
Figure 210: Example output |
---|
For the 2D Barcode DataMatrixEx, it is also possible to enter 4 values separated by a comma. Then the text of the barcode is wrapped around it.
Figure 211: Example of a special formatted barcode