|
<< Click to Display Table of Contents > Hatch Style |
  
|
|
<< Click to Display Table of Contents > Hatch Style |
|
The following hatch styles can be chosen:
|
The marking direction is alternating. Jumps are executed between the hatch lines. |
|---|---|
|
The marking direction is conserved from left to right. Jumps are executed between the hatch lines. |
|
The marking direction is conserved from right to left. Jumps are executed between the hatch lines. |
|
Hatch lines are closed and follow the outline of the entity. Jumps are executed between the hatch lines. This style is only valid for objects of type: ScLayer, ScWinTextChars2D and ScLayerSolid. |
|
For this continuous hatch style, the marking direction is alternating. Hatch lines are connected (laser remains on) if the distance between end and start point of lines is less than or equal the minimal jump distance. |
|
For this continuous hatch style, the marking direction is alternating. Hatch lines are connected (laser remains on) if the distance between end and start point of lines is less than or equal the minimal jump distance. Please note: in this case the style leads to non-parallel hatch lines. |
Switching between the different hatch styles is done by clicking on the hatch style icon. The blue lines on the bitmap show mark lines and their direction. The red lines show the scanner jumps.
