|
<< Click to Display Table of Contents > AutoCalib (RTC only) |
  
|
|
<< Click to Display Table of Contents > AutoCalib (RTC only) |
|
For RTC4 and RTC5 scanner cards, an AutoCalib control object can be inserted into the entity list to perform an automatic self-calibration of an appropriate scan head, which supports this functionality. The corresponding ScAutoCalib symbol 
within the functionality object toolbar has to be activated by checkbox AutoCal within sc_setup.exe → Hardware Settings → Settings → Driver Settings → Mode before. To change the properties of an AutoCalib control object it has to be selected by clicking on it. Then the Control property page can be activated and the properties can be changed:
Figure 287: AutoCal Control Object |
Enable: This checkbox activates the AutoCal control object. Parameter: Card ID: Primary card: 0, secondary card: 1, default = 0 Func ID: 1.Turn auto calibration mode on and go to the reference position for an initial calibration 2.Recalibrate 3.Turn off auto calibration mode |
|---|
|
The Func ID parameters are different from those of the RTC manuals. |
|---|
The output value can be checked by the Command View command AutoCal (here it corresponds to the RTC manuals).
