<< Click to Display Table of Contents > Self Powered |
Connect your external power supply to the V_EXT connector as shown in Figure 5: Power section. Furthermore you have to put the jumper in the power area in a certain position
Version DB-37 |
Position |
---|---|
V1.3 |
JP5: 1/2 |
V2.1 |
JP1 PWR EX: 2/3 |
V3.0 |
N/A |
Table 3: Self Powered jumper position
The green PWR_LD should glow in bus powered mode as well as in self powered mode. |
---|