<< Click to Display Table of Contents > 

DB-37 Manual > Connectors And Indicators > Opto I/O > Opto_Out Test

Opto_Out Test 		Previous pageReturn to chapter overviewNext page

note

Make sure that JP2 (V1.3) is removed or the OPTO switch 2 - OO OI (V2.1 ) is closed.

•Start the "USC TEST". Press the button "OptoOut".

•The blue LEDs O0..O5 will be shut down successively.

•The Opto_Out signals can also be gripped at the multi-pin connector "OPTO-OUT". The pin assignment is shown in table 6.

Signal

Indicator

OPTO-OUT Pin

Opto_Out_0

0O

1

Opto_Out_1

O1

2

Opto_Out_2

O2

3

Opto_Out_3

O3

4

Opto_Out_4

O4

5

Opto_Out_5

O5

6

Table 6: Opto_Out pin and LED assignment