<< Click to Display Table of Contents > Marking On The Fly Channels |
The yellow LEDs MOF_CH0 and MOF_CH1 are blinking when Marking On The Fly Encoder signals are pending to the card. The LaserPort and Marking On the Fly signals can also be gripped at the multi-pin connector "LP_MOF". The pin assignment is shown in table 9.
Signal |
Indicator |
Pin |
---|---|---|
LP 0 |
LP0 |
1 |
LP 1 |
LP1 |
2 |
LP 2 |
LP2 |
3 |
LP 3 |
LP3 |
4 |
LP 4 |
LP4 |
5 |
LP 5 |
LP5 |
6 |
LP 6 |
LP6 |
7 |
LP 7 |
LP7 |
8 |
Marking On The Fly channel 0 |
MOF_CH0 |
9 |
Marking On The Fly channel 1 |
MOF_CH1 |
10 |
Table 9: LP & MOF pin and LED assignment