<< Click to Display Table of Contents > RTC DLL Error |
Figure 23: DLL not found.
Figure 24: DLL initialization failed!
Figure 25: RTC Error in Module Optic for load_program_file.
|
Description |
---|---|
Error Message |
•DLL not found. •Error -4 in Module Optic: RTC Error; RTC4_DEVICE-Standard DLL error 11 returned by function <load_program_file> •Error -4 in Module Optic: RTC Error; RTC4_DEVICE-Standard DLL error 8 returned by function <load_program_file> |
Cause |
The DLLs for the RTC card are not found. |
Solution |
•Apply the correct path and file of the RTC DLLs in sc_setup - Hardware Settings. •Please consult the RTC4 manual to find out the meaning of the error code. •A possible solution for error 8 might be renewing the files from RTC cards manufacture (e.g. RTC4D2.hex, RTC4D3.hex, RTC4DLL.dll, RTC4Dllx64.dll) |
Table 42: Description of error DLL errors for RTC cards.