<< Click to Display Table of Contents > Output Bit |
Figure 20: Output Bit
|
Description |
---|---|
Error Message |
Output Bit 'SC_OPTO_STATUS_IO_OUT_...' with current index x [ 1..n ] is already in use !!! |
Cause |
The output bit with index x is taken twice. It can only be defined for one function. |
Solution |
Check all output bits which are defined for double usage. These outputs can be defined in the IO settings, in the Laser settings or for motion type 8 or type 14. |
Table 40: Description of error 'Output Bit is already in use'.