<< Click to Display Table of Contents > 

FAQ > Error Messages > License Issues > No Valid License > Multiple Heads

Multiple Heads 		Previous pageReturn to chapter overviewNext page

error_multipleHEADS

Figure 13: Module Optic: Output Device still executing.

 

Description

Error Message

SAMLight is closing because the head count of the current settings is greater than one.

Cause

Multiple heads are defined or connected, but there is no MultiHead license or no MultiCard flag (Flash license required).

Solution

Check if your license has a MultiHead option activated or activate the MultiCard flag.

Table 33: Description of error 'Multiple Heads'.