|
<< Click to Display Table of Contents > GalvoOutOfRange |
  
|
|
<< Click to Display Table of Contents > GalvoOutOfRange |
|
Figure 9: Galvo Coordinates out of range.
|
Description |
|---|---|
Error Message |
Galvo Coordinates: x, y, z out of range |
Cause |
Calculated galvo position is out of the valid scanner range from -32768 to 32767. |
Solution |
Make sure all entities are placed inside the optical field. For Multihead split: activate the splitting. |
Table 28: Description of error 'Galvo Coordinates out of range'.